 |
 |
|
Distribution and connection
|
|
|
|
|
|
|
|
|
 |
Connection and Metering Wall-mounted Cabinets |
|
The Mininter, Minimixt, Paninter, Soclinter and Maxinter boxes are made in heat moulded fibreglass reinforced polyester.
These products offer good shock resistance and do not require any specific maintenance. They allow the fitting of the metering equipment on the outside, at the edge of the property. In addition they can be fitted with optional insulation according any foreseen risks of frost. They are supplied with or without meter support equipment.
|
|
Connection and metering |
|
|
|
|
|
|
|
|
|
Connection Pillar |
|
Technical: HN 62-S-22
Material: HN 60-E-02 and HN 60-S-02
|
|
The connection pillar is designed to connect individual houses to the drinking water supply network. Located at the edge of the property, it makes meter reading easy. In addition, the pillar is made in different versions so that it can be adapted to the operating and climatic conditions.
Performance: :
- Protected against frost
- Fitted with a complete hydraulic pump
|
|
Connection of individual houses to the drinking water supply network |
|
|
|
|
|
|
|
|
|
AQUAX® and AQUAX 110® Pillars |
|
AQUAX: Connection pillar for coaxial meters
This underground water connection and metering equipment is especially designed to hold coaxial meters from 1.5 to 2.5 m³/h, and can be installed under the pavement in public or private areas. It is a discreet disconnection and metering point which fits in with the environment. It protects the meter from risks of frost.
AQUAX 110: Underground compact pillar for in-line 110mm meter
This compact underground water connection equipment is a discreet disconnection and metering point which fits in perfectly with the environment. It is designed to hold in-line 110mm meters. It provides efficient frost protection and is easily maintained thanks to its fully removable hydraulic pump which can be dismantled.
|
|
Connection to the distribution network |
|
|
|
|
|
|
|
|
|
COMPOZIT® Water meter |
|
Frost-resistant connection |
|
The use of composite materials allows a connection solution to be offered which is adaptable to heat, mechanical and installation constraints.
The underground COMPOZIT® for in-line meters is designed to connect subscribers to the water distribution network. It allows the integration of one or two in-line meters and the usual associated hydraulic equipment (rails, taps, valves,…).
Designed for urban areas and housing estates, it has been designed with the aim easing, speeding up and making safer the connection of communal or individual housing.
|
|
Underground service box for in-line meters |
|
|
|
|
|
|
|
|
|
Multi-Compozit Underground Water meter box |
|
This underground water meter box is designed for the connection of water consumers to the water distribution network.
It is composed of parts made of synthetic materials reinforced with fibreglass (GRP) :
- A15 class cover or B125 class cover
- Adjustable B125 class frame
- Extension resisting to compression
- Tank
- Bottom
|
|
- Reduced visible surface
- Easy to install at the bottom of the trench
- Easy to handle
- 2 range of height : fixed and adjustable
|
|
Connection to the distribution network |
|
|
|
|
|
|
|
|
|
Priméo® Underground box |
|
Priméo® is an underground box composed of parts of synthetic materials reinforced with fibreglass (GRP). It is designed to connect consumers to the water distribution network and hold an in-line meter.
It can also be installed in parks and public or private gardens to protect watering or irrigation equipement.
|
|
- Small size and light weight
- Easy handling and installation
- Multipurpose:
· Connection to the water distribution network
· Meter housing
· Automatic watering system
- Able to bear a 500 kg load
- Standard black cover, also available in green
|
|
Connection to the distribution network |
|
|
|
|
|
|
|
|
|
|
